O guia definitivo para militec

  Este procedimento do óleo do motor ajuda os motores a se manterem pelo seu melhor, revestindo peças e superfícies e minimizando o atrito de modo a evitar o desgaste excessivo. Tratar este óleo do motor É possibilitado a evitar a apreensãeste de um motor.

Militec-1 is not a cleaning agent, it wasn't designed to be one, because if you are a jack of all trades you are a master of none. It was designed exclusively to be a lubrication agent when used as a metal conditioner.

How does MILITEC-1 compare to other gun lubricants on the market? Is it suitable only for lubrication, or can it be used also for cleaning?

Would I harm a blade by putting it in an oven set at 140ish for about 15 minutes, then apply the militec? Thats the only way I have to know what its temperature is.

To be perfectly honest, while lubrication is very important, I want the steel surfaces of my guns to be protected, too. It may be easy to "set" a lube in a desert, but where can one find a hairdryer in the woods?

I use a hairdryer for about 30 seconds on the pivot area and it seems to make the difference with Miltec. As others have mentioned, Miltec works fine without heating -- the heating seems to make it just a bit smoother.

Although The High Road has attempted to provide accurate information on the forum, The High Road assumes pelo responsibility for the accuracy of the information. All information is provided "as is" with all faults without warranty of any kind, either express or implied. Neither The High Road nor any of its directors, members, managers, employees, agents, vendors, or suppliers will be liable for any direct, indirect, general, bodily injury, compensatory, special, punitive, consequential, or incidental damages including, without limitation, lost profits or revenues, costs of replacement goods, loss or damage to data arising out of the use or inability to use this forum or any services associated with this forum, or damages from the use of or reliance on the information present on this forum, even if you have been advised of the possibility of such damages.

Стоимость и срок доставки зависят от веса товара и места вручения. Для расчета стоимости доставки необходимо оформить заказ.

Not knowing anything about WeaponShield, except that they make it themselves, I don't know how consistent their formula is, whether they're making it in bathtubs or vats or what.

Unfortunately, samples only are good for the short term, yet I'm impressed that a fonte original they resist corrosion whereas MILITEC-1 only claims to when "set" with a hair dryer.

MILITEC-1 has a very low evaporation rate and will not dry out and "disappear" like MilSpec CLP. Firearms remain properly lubricated for a much longer period of time. In fact, MILITEC-1-treated firearms can even be taken out of extended storage and fired immediately with no additional care.

I was happy to see my knife, but also amazed to find a bottle of cold blue had leaked in the bottom of the cleaning kit and a lot of stuff in the bottom was rusty (that stuff is corrosive big time). The knife however, was untouched, not a flek of rust anywhere. I started through the safe completely dissass. everything and treating . I have been very pleased with the rust protection as well as smooth operation of everything treated with MiliTec."  

Exatamente quando usados em pequenas quantidades, esses aditivos transformam as propriedades Destes lubrificantes.

Все категорииДом и СадДетские товарыЭлектроникаКомпанияКультура и развлеченияМодаАвто и мотоСпорт и ТуризмСупермаркетКрасотаЗдоровье